Monday, July 20, 2009

Configuring both Airtel and BSNL on the same modem

I'm in a cleanup spree! Just getting all those not-working and I'll-fix-it-later issues sorted out.. I have two broadband connections, one from BSNL and another from AirTel. BSNL: cheap, not-so-reliable, poor support. AirTel: Costs double (for similar packages), reliable, good support. Basic plans in each connection give me 2MBPS, 3GB for Rs.500/- and reliability of having both connections! Best of both worlds eh..!

Ok, that's background enough... The problem: one fine day, the BSNL Huawei Mt882 modem packed up. I couldn't get it working as it had a hardware failure. If I could get the AirTel modem (Huawei MTx880) working for BSNL, then it would be great. I knew I could, but I wanted to have both configurations on the same, so that when I switch over for some time in a month, it should be a simple task.

I've used PVC-0 for AirTel configuration (which is by default) and PVC-3 for BSNL configuration.

1. Go to the modem administration page - typically My modem was a Huawei MT880 from AirTel. Should be similar for other modems.
2. Navigate to Basic --> WAN Setting. You would be at PVC-0.
3. Set the following: Active: 0; Default Route: Disable
4. AirTel uses the setting: VPI/VCI: 1/32 while BSNL uses 0/35. This is set by the provided and has to be that.
5. PVC-3 has VPI/VCI value of 0/35 and setting PPPoE. Set the below values -

  • Active: Yes

  • Mode: Routing (not Bridge)

  • Encapsulation: PPPoE

  • Service Name: DataOne

  • UserId: (your bsnl-userId without

  • Password: (your password)

  • Default Route: Enabled (only of the connections can be the Default Route)

6. Save the settings. If you get the error "FAILED: Due to Duplicate VPI/VCI", then set some random VCI numbers from, say from 36 to 50 for all other default PVC configurations available on the router. By this time, your PVC3 settings wouldn't have been saved, so you may have to re-do step-5.

7. That's it! Power off the modem, connect the new BSNL phone line and power-on you should be online! The Service information on the administration page should look like this...

Whenever, you need to switch, all we need to do is to switch the Active and Default-Route settings!
If you found this useful, please comment on my blog, so that others can benefit!

Sunday, July 12, 2009

Making SDHC card work with WM6

Another tech-challenge... to keep life interesting! I bought a 4GB Kingston SDHC at a good deal from a sale. Came home, put it on my PDA running Windows Mobile 6.1 - just as my fears tell, it didn't work! Surprisingly, it worked on a simple Nokia phone and a Chinese phone from a friend. All I thought of was - if it's not a hardware incompatibility, I may be able to get it working.

And, of course, got it working on my HTC P3300! A couple of hours of googling and reading.

Phone: HTC P3300
OS: Windows Mobile 6.1
Card: Kingston SDHC 4GB, Class-4
Installer used: Artemis ( extracted from
See link:

First try: Installed, but wireless stopped being detected. Just as explained here.

Second Try (successful!): Installed artemis and works like a charm!

As always, comment on this post, if you have further information on this one.